Solid Brass Plumbing Pipe table mounted twin shelf

AUD $1,255.00AUD $1,825.00


Distance from bench to first shelf in mm * (+AUD $0.54)

Choose the gap from your bench mount to the top of the first shelf.

Distance between shelves in mm * (+AUD $0.54)

Total length * (+AUD $0.27)

This is to determine the top brace length as a two upright or three upright shelf.

Download Pdf

Product Description

Solid Brass Plumbing Pipe table mounted twin shelf is an industrial looking two shelf system made from plumbing pipe. Vintage style plumbing components are solid brass pipe and fittings. Support fittings may be steel however.  Designed to withstand a reasonable weight, the shelf is suitable for many uses attached firmly to a table or bench surface via flanges attached at the base. The pipe we use for this product is 21mm solid brass outside diameter.

This product is supplied as separate upright brackets assembled just needing the top support brace, shelves and table base to determine your overall length. The gaps between shelves can be selected when ordering. For most installations two uprights will be all that is required.

The Shelf Hardware:

If your shelf is going to be any wider than 1200mm, we recommend you use a third bracket in the middle of the timber to avoid any bowing. The timber shelves can be up to 500mm wide to fit this kit.

Screws are provided for timber shelves. The bench surface being attached to and the screws that are being used will determine the weight load of the shelf itself.

The Timber:

The timber is not included in the product as it was a feature piece and is too much of an unreliable size and type.
Recommend size of the timber is 500mm wide and at least 25mm thick.

Hardware supplied

This product is supplied fully assembled. Brass surface is an industrial quality semi brushed surface with minor tool mark and casting imperfections. This natural finish will tarnish and so a polish with Brasso will be required to keep a brass finish.